Red dot plates for CZ P10C Optics Ready.
To install a red dot to your CZ P10C Optics Ready model, you need to get an optics ready plate. Here we have such. They will allow you mounting of many different red dots to your gun: Trijicon, Holosun, Vortex, etc.
Unique accessories✔️ In stock✔️ Quality from Czech republic✔️
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
When you buy an optics ready CZ P-10 model, to mount a red dot to the gun you will need to get an optic plate adapter. And in this category you will find those.
With adapters listed here you will be able to install red dots with the following footprints to your CZ P10 OR:
Plates that you can find in this category will fit the following CZs:
Installation is very simple and can be done by yourself at home, unless you are really not technical type.
You just have to 1. unscrew the factory screws holding the slide cover, 2. remove the cover, 3. place into the slide cut the plate (in the correct orientation), 4. place blue locktite on the screws that come with the plate, and 5. screw in the fixation screws.
Once the plate is firm in its place, you can continue with installation of a red dot to the plate. Bear in mind, the screws that come to you together with the plate are to be used for fixation of the plate to the slide. Screws that hold the red dot to the plate are supposed to come together with the red dot sight.
CZ P-10 optics ready models allow to use both: sights and red dot. The dovetail cut for rear sight of P10 OR models is the same as with classic CZ P10 models (without the optics cut) but the dovetail cut is moved further to the back. Thus you cannot really use the same sights on your CZ P10 Optics Ready model as you could on your classic CZ P10 model. Why? It would fit in, but it would hang over the slide.
Luckily enough, there exist cowitness sights, which are made taller and shorter, so that they can be used together with the red dot as a backup. Only limitation, compared to the classic P10 models, is that these sights are always fixed and cannot be heigth & side adjustable. That is because the adjustable mechanism needs the sights to be longer, and such would then hang over the slide in the back.
We recommend getting together with optic plate also sights made for the OR models to cowitnes - you can find those here.
If you have a classic CZ P10 model (CZ P10C, CZ P10F, CZ P10S) - a version of P10 without the slide cut - you will be still able to install a red dot to your gun.
However, instead of optic plate you will need a red dot mount. You can find such mounts for P-10 models listed here: CZ P-10 red dot mounts.
Optic plates are designed to work just and only on optics ready models, not on classic models that do not have the optic cut in the slide. If you are not sure which version of CZ P10 you have, rather email us with photo of it to info@cz-parts.com and we double check and confirm what to get.
Somos una empresa checa especializada en accesorios para CZ.
Aquí puede encontrar todo tipo de accesorios CZ, tanto de la propia CZ como de otros fabricantes europeos.
Tenemos miras, empuñaduras, cargadores y fondos, y más para todo tipo de CZ:
¡Modelos CZ TS 2, CZ Shadow 2, CZ P-10, CZ 75 P-01 y Compact, CZ P-07, CZ P-09, CZ 75B y otros!
¡Hacemos envíos internacionales y aceptamos pagos con tarjeta en línea!
