Because CZ TS 2 models are all designed from ground for competitive shooting, also the sights available for these models are made only for those purposes. You can find here sights that are fully adjustable (windage as well as elevation) and equipped with fiber optics for better visibility and easy finding of front sight.   

Compatibility of CZ TS 2 sights

CZ share the compatibility among few model groups. All pistols from CZ TS 2 series, and also from CZ TS 1 series share the same dovetail cuts for rear sight. 

Therefore you can install these sights to the following models:

• CZ TS 2
• CZ TS 2 Deep Bronze
• CZ TS 2 Racing Green
• CZ TS 2 Orange*
• CZ 75 Tactical Sports
• CZ TS Orange
• CZ TS Czechmate*

*models with this sign use little different mounting system for front sight - instead of pin the front is secure by screw; that is not a problem for CZ Parts - just write us into order comment that its for one of those models and we will include front sight with the correct mounting system for your model* 

What improves with sights

Your shooting results will improve. You will be able to better find the target once fiber optic glows [must be in good light conditions of course]. 

Also it improves your aiming speed - to find 1 green dot [front sight with fiber] between two red dots [rear sight with fiber] is much faster.

And if your eye sight is worse than it used to be, glowing fiber optic front sight also helps a lot.    

Which sight set to choose

The most popular choice is contrast colros in the front and in the rear sight in combination of 1mm fiber rod in the rear sight, and 1.5mm fiber rod in the front sight. Why is that? Because the front sight is further from you, the larger fiber rod does not look that much larger comapred to the fiber rods in the rear sight.

If you go for sights with fiber optic rod only in the front though, we would recommend going for 1mm fiber optic rod in the front sight as there are no fiber rods in the rear sight.

You can also mount a red dot to your CZ TS 2 models

Although TS 2 and TS 1 models come from production as classic handguns without the slide cut for optics, you still can install a red dot to it.

With some of the TS 2 and TS 1 models you have even more choice than with other CZs - you can install a red dot to side mount if you have TS 2 Orange, Racing Green or TSO or Czechmate (and use the rear sight dovetail cut for slide racker). Or you can use the classic dovetail red dot mount.

These mounts come usually as universal ones. Thanks to that you can install very wide range of red dots to it.  

You can find red dot mounts for CZ TS 2 models here.

And if you decide to use the red dot mount, we recommend getting also the front sight filler that you can find here so that you do not have the factory front sight there for no reason (since rear sight would be replaced by red dot mount or slide racker). This filler will work with all CZ TS 2 and CZ TS 1 models except of the TS 2 Orange and CZ TS Czechmate.