Manuf.: CZ
Expedition: In stock
Price from: 35 $
Original CZ base pad for CZ Shadow 2 models, CZ 75B models, CZ 75 SP-01 models, CZ 75 P-01 models and CZ 75 Compact models. Hard elox finish, made of aluminium.
Manuf.: CZ
Expedition: In stock
Price from: 35 $
Original CZ base pad for CZ Shadow 2 models, CZ 75 SP-01 models. Hard elox finish, made of aluminium. CZ base pad +0rnd. This base pad will work together with magwell as well as without magwell.ll.
Manuf.: CZ
Expedition: In stock
Price from: 35 $
Original CZ base pad for CZ Shadow 2 models, CZ 75 SP-01 models. Hard elox finish, made of aluminium. CZ base pad +2rnd. This base pad will not work together with magwell.
Manuf.: CZ
Expedition: Out of stock
Price: 55 $
Original CZ nickel magazine for CZ Shadow 2 models, CZ 75 SP-01 models. Capacity of the magazine is 19 round. The magazine has polymer mag pads.
Manuf.: Toni System
Expedition: Out of stock
Price from: 54 $
Original Toni System base pad for CZ Shadow 2 models, CZ 75B models, CZ 75 SP-01 models, CZ 75 P-01 models and CZ 75 Compact models. Hard elox finish, made of aluminium.
Manuf.: Toni System
Expedition: In stock
Price from: 10 $
Recoil spring for most of CZ models. Will allow easier manipulation with slide and achieve better behaviour of the gun. By using weaker recoil spring you can reduce the lifetime of the gun. Made in Italy by...
Manuf.: Zendl
Expedition: In stock
Price from: 15 $
Sear spring replacement for most of CZ models. Sear spring allows increase in trigger pull. Made in Czech republic by gunsmith Zendl.
Manuf.: Toni System
Expedition: In stock
Price from: 65 $
Original Toni System base pad for CZ Shadow 2 models, CZ 75B models, CZ 75 SP-01 models, CZ 75 P-01 models and CZ 75 Compact models. Hard elox finish, made of aluminium.
Manuf.: Zendl
Expedition: In stock
Price from: 138 $
Fully adjustable rear sight with fiber optics for CZ Shadow 2 models, CZ 75 SP-01 Shadow models and other CZ Shadow line models. Made in Czech republic by renowned gunsmith Zendl.
Manuf.: CZ
Expedition: In stock
Price from: 110 $
Aluminium grips for CZ Shadow 2 models, CZ TS 2 models and other CZ 75B & SP-01 models. These grips are long and thus to be used only without magwell.
Manuf.: Toni System
Expedition: In stock
Price from: 10 $
Weaker main spring (hammer spring) for most of CZ models. Will achieve lower trigger pull, especially in double action regime. To avoid malfunctions its reccomended to switch also firing pin spring for...
Manuf.: Eemann Tech
Expedition: In stock
Price: 45 $
The ultimate spring kit includes all competition springs available for CZ pistols: CZ Shadow 2, CZ 75B models, CZ 75 SP-01 & CZ 75 SP-01 Shadow.
Manuf.: CZ
Expedition: Out of stock
Price: 50 $
Original CZ magazine for CZ Shadow 2 models, CZ 75 SP-01 models. Capacity of the magazine is 17 round. The magazine has polymer mag pads.
Manuf.: Zendl
Expedition: In stock
Price from: 166 $
Fully adjustable sight set for CZ Shadow 2 models, CZ 75 SP-01 Shadow models and other CZ Shadow line models. Sight set with side and height adjustable fiber optic rear sight and fiber optic front sight.
Manuf.: CZ
Expedition: Out of stock
Price: 50 $
Original CZ magazine for CZ Shadow 2 models, CZ 75 SP-01 models. Capacity of the magazine is 19 round. The magazine has polymer mag pads.
Manuf.: CZ
Expedition: Out of stock
Price: 55 $
Original CZ nickel magazine for CZ Shadow 2 models, CZ 75 SP-01 models. Capacity of the magazine is 17 round. The magazine has polymer mag pads.
Manuf.: CZ
Expedition: In stock
Price from: 110 $
Aluminium short grips for CZ Shadow 2 models, CZ TS 2 models and other CZ 75B & SP-01 models. These grips are short and thus to be used only with magwell. CZ grips with Shadow 2 design.
Manuf.: Toni System
Expedition: In stock
Price from: 43 $
Original Toni System base pad for CZ Shadow 2 models, CZ 75B models, CZ 75 SP-01 models, CZ 75 P-01 models and CZ 75 Compact models. Hard elox finish, made of aluminium.
Manuf.: Toni System
Expedition: In stock
Price from: 30 $
Original Toni System base pad for CZ Shadow 2 models, CZ 75B models, CZ 75 SP-01 models, CZ 75 P-01 models and CZ 75 Compact models. Hard elox finish, made of aluminium. Toni System base pad.
Manuf.: Eemann Tech
Expedition: In stock
Price: 20 $
Set of thin buffers for CZ 75B models, CZ Shadow 2 full size models and CZ 75 SP-01 Shadow models. The buffers are thick only 2mm.
Manuf.: Toni System
Expedition: In stock
Price from: 35 $
Original Toni System base pad for CZ Shadow 2 models, CZ 75B models, CZ 75 SP-01 models, CZ 75 P-01 models and CZ 75 Compact models. Hard elox finish, made of aluminium.
Manuf.: Zendl
Expedition: In stock
Price: 116 $
Fully adjustable rear sight for CZ Shadow 2 models, CZ 75 SP-01 Shadow models and other CZ Shadow line models. Made in Czech republic by renowned gunsmith Zendl.
Manuf.: CZ
Expedition: In stock
Price from: 110 $
Original CZ magwell for CZ 75B models, CZ 75 SP-01 models and CZ 75 SP-01 Shadow models. Hard elox finish, made of aluminium.
Manuf.: CZ
Expedition: In stock
Price from: 110 $
Aluminium grips for CZ 75B & SP-01 models, CZ Shadow 2 models and CZ TS 2 models. These grips are long and thus to be used only without magwell. CZ grips with CZ pistol logo design.
Manuf.: Armanov
Expedition: In stock
Price from: 30 $
Armanov base pad for CZ Shadow 2 models, CZ 75B models, CZ 75 SP-01 models, CZ 75 P-01 models and CZ 75 Compact models.
Manuf.: Kummer
Expedition: In stock
Price: 90 $
Red dot mount for CZ Shadow 2 models, CZ 75 SP-01 Shadow models and other CZ Shadow line models. Allows mounting of Trijicon RMR and Trijicon SRO red dots.
Manuf.: Eemann Tech
Expedition: In stock
Price: 97 $
Slide stop designed at the same time to function as a thumb rest. Designed to work with CZ 75B, CZ 75 SP-01 & CZ 75 SP-01 Shadow models.
Manuf.: Toni System
Expedition: In stock
Price: 90 $
Universal red dot mount for CZ Shadow 2 models, CZ 75 SP-01 Shadow models and other CZ Shadow line models. Allows mounting of following red dots Trijicon RMR / SRO, Holosun 407C / 507C, Vortex Razor, C-More...
Manuf.: CZ
Expedition: In stock
Price from: 110 $
Short aluminium grips for CZ 75B & SP-01 models, CZ Shadow 2 models and CZ TS 2 models. These grips are short and thus to be used only with magwell. CZ grips with CZ pistol logo design.
Manuf.: Zendl
Expedition: In stock
Price from: 15 $
Trigger spring replacement for most of CZ models. Trigger spring allows decrease in trigger pull. We recommend to use this spring while changing the double acction pistol to single action. You will achieve...
Manuf.: Toni System
Expedition: In stock
Price from: 35 $
Original CZ base pad for CZ Shadow 2 models, CZ 75B models, CZ 75 SP-01 models, CZ 75 P-01 models and CZ 75 Compact models. Hard elox finish, made of aluminium. CZ base pad +2rnd.
Manuf.: Toni System
Expedition: In stock
Price: 90 $
Universal red dot mount for CZ Shadow 2 models, CZ 75 SP-01 Shadow models and other CZ Shadow line models. Allows mounting of following red dots Vortex Venom, Vortex Viper, Leupold Delta Point Pro, Shield...
Manuf.: CZ
Expedition: In stock
Price: 20 $
Original CZ doublebrush bore cleaning string for fast and easy cleaning of your CZ. For caliber 9x19.
Manuf.: Eemann Tech
Expedition: In stock
Price: 40 $
Set of pins for CZ models for the most commonly disassembled and assembled pins. Compatible with CZ TS 2 models, CZ Shadow 2 models, CZ 75B models and CZ 75 SP-01 models incl SP01 Shadow.
Manuf.: CZ
Expedition: In stock
Price from: 110 $
Aluminium short grips for CZ TS 2 models, CZ Shadow 2 models and other CZ 75B & SP-01 models. These grips are short and thus to be used only with magwell. CZ grips with TS 2 design.
Manuf.: CZ
Expedition: In stock
Price: 115 $
Fully adjustable rear sight for CZ Shadow 2 models, CZ 75 SP-01 Shadow models and other CZ Shadow line models. Made in Czech republic by CZ.
Manuf.: Zendl
Expedition: In stock
Price: 105 $
Red dot mount for CZ Shadow 2 models, CZ 75 SP-01 Shadow models and other CZ Shadow line models. Allows mounting of Trijicon RMR and Trijicon SRO red dots.
Manuf.: Eemann Tech
Expedition: In stock
Price: 102 $
Slide stop designed at the same time to function as a thumb rest. Designed to work with CZ 75B, CZ 75 SP-01 & CZ 75 SP-01 Shadow models.
Manuf.: Toni System
Expedition: In stock
Price from: 10 $
Weaker firing pin spring is being used together with weaker main spring (hammer spring) in order to avoid malfunctions. Made by gunsmith Zendl.
Manuf.: Eemann Tech
Expedition: In stock
Price: 45 $
Brass base pad for CZ Shadow 2 models, CZ 75B models, CZ 75 SP-01 models, CZ 75 P-01 models and CZ 75 Compact models. This mag pad will work together with magwell as well as without magwell.
Manuf.: CZ
Expedition: In stock
Price from: 110 $
Aluminium grips for CZ TS 2 models, CZ Shadow 2 and other CZ 75B & SP-01 models. Original CZ grips with TS 2 design. These grips are long and thus to be used only without magwell.
Manuf.: Kummer
Expedition: In stock
Price: 90 $
Red dot mount for CZ Shadow 2 models, CZ 75 SP-01 Shadow models and other CZ Shadow line models. Allows mounting of Holosun 407C, Holosun 507C and Holosun 508T red dots.
Manuf.: CZ
Expedition: In stock
Price: 75 $
Original CZ base pad for CZ Shadow 2 models, CZ 75 SP-01 models. Made of brass. CZ base pad +2rnd. This base pad will not work together with magwell.
Manuf.: Kummer
Expedition: In stock
Price: 90 $
Red dot mount for CZ Shadow 2 models, CZ 75 SP-01 Shadow models and other CZ Shadow line models. Allows mounting of Shield red dots: Shield SMS, Shield SMSc, Shield RMS, Shield RMS 2, Shield RMSx.
Manuf.: Toni System
Expedition: In stock
Discount: 13,6 %Price from: 95 $
Short aluminium grips for CZ 75B & SP-01 models, CZ Shadow 2 models and CZ TS 2 models. These grips are short and thus to be used only with magwell. Toni System grips.
Manuf.: Zendl
Expedition: In stock
Price from: 144 $
Fully adjustable sight set for CZ Shadow 2 models, CZ 75 SP-01 Shadow models and other CZ Shadow line models. Sight set with side and height adjustable rear sight and fiber optic front sight.
Manuf.: Toni System
Expedition: In stock
Discount: 11,5 %Price from: 115 $
Short aluminium grips for CZ 75B & SP-01 models, CZ Shadow 2 models and CZ TS 2 models. These grips are short and thus to be used only with magwell. Toni System ergonomic 3D grips.
Manuf.: Armanov
Expedition: In stock
Price from: 105 $
Short aluminium grips for CZ Shadow 2 models, CZ TS 2 models and other CZ 75B & SP-01 models. These grips are short and thus to be used only with magwell.
Manuf.: Zendl
Expedition: In stock
Price: 105 $
Red dot mount for CZ Shadow 2 models, CZ 75 SP-01 Shadow models and other CZ Shadow line models. Allows mounting of Shield red dots: Shield SMS, Shield SMSc, Shield RMS, Shield RMS 2, Shield RMSx.
Manuf.: CZ
Expedition: Out of stock
Price: 150 $
Short brass grips for CZ 75B & SP-01 models, CZ Shadow 2 models and CZ TS 2 models. These grips are short and thus to be used only with magwell. CZ grips with CZ pistol logo design.
![CZ Shadow 2, CZ 75B, CZ P-01, CZ 75 SP-01 alu TS base pad | +1.5rnd [for IPSC Box]](https://www.cz-parts.com/deploy/img/products/3191/tn_CZ_SHADOW_2__CZ_75B___SP_01__CZ_75_P_01___COMPACT_ALU_MAG_PAD__1_5rnd__for_IPSC_Box__.jpg "CZ Shadow 2, CZ 75B, CZ P-01, CZ 75 SP-01 alu TS base pad | +1.5rnd [for IPSC Box]")
