Adapter for installation of AR-15 type stocks for CZ Scorpion EVO 3 models and 3+ models.
Made of aircraft duralumin 7075, hard elox finish.
Made in Czech republic.
Compatibility
This stock is compatible with following CZ models:
all CZ Scorpion Evo models
all CZ Scorpion 3+ models
Specification of the stock adapter
This adapter was designed with a focus on stiffness and minimum clearances that would otherwise compromise accuracy.
There is a small cut-out on the bottom, through which you can get to the disassembly button.
This allows the stock to be removed together with the installed stock tube. The stock tube is fixed against rotation with two set screws.
original Ascalon product
made in Czech republic
excellent quality
factory new
made of duralumin, hard elox finish
The package contains a 1.5 mm Allen key for tightening the set screws.
Two set screws are installed forward in place and secured with a liquid cotter pin. This requires a slight effort to turn them.
Installation
Simply remove the stock / stock plug that is at the moment installed on your Scorpion by pushing the release button underneath it. If you have folding stock, the button will be onyl visible upon folding the stock. If you have a stock plug, you may need to use hex key to access the button underneath it.