Manuf.: CZ
Expedition: In stock
Price: 150 $
Brass grips for CZ 75B & SP-01 models, CZ Shadow 2 models and CZ TS 2 models. These grips are long and thus to be used only without magwell. CZ grips with CZ pistol logo design.
Manuf.: CZ
Expedition: In stock
Price: 20 $
Original CZ part.
Manuf.: CZ
Expedition: In stock
Price: 30 $
Original CZ sling in realtree style, made of combination of nylon and rubber. For CZ 457 models, CZ 600 models, CZ 527 models and CZ 557 models. Will fit also any other CZ long rifle. From the inside side...
Manuf.: CZ
Expedition: Out of stock
Price: 50 $
Original CZ magazine for CZ TS 2 models, CZ 75 Tactical Sports, CZ TS Czechmate & CZ TSO. Capacity of the magazine is 17 round. The magazine has polymer mag pads.
Manuf.: Toni System
Expedition: In stock
Discount: 11,5 %Price from: 115 $
Aluminium grips for CZ 75B & SP-01 models, CZ Shadow 2 models and CZ TS 2 models. These grips are long and thus to be used only without magwell. Toni System 3D grips.
Manuf.: Angry Bear
Expedition: Out of stock
Price: 145 $
Tritium night sights for CZ 75B models, CZ 75 P-01 & Compact models, CZ 75 SP-01 models, CZ 85 and CZ 97 models.
Manuf.: Ascalon Arms
Expedition: In stock
Price: 13 $
Lighter striker spring kit for CZ P-10C models, CZ P-10F models, CZ P-10S models and CZ P-10SC models. Striker spring for CZ P-10 reducing trigger pull to 1.6 kg or 3.5 lbs.
Manuf.: CZ
Expedition: In stock
Price: 5 $
Original CZ part.
Manuf.: Toni System
Expedition: In stock
Price: 90 $
Original Toni System optic plate for CZ Shadow 2 Optics Ready and CZ Shadow 2 Compact. This plate allows mounting of a red dot sights with C-More RTS footprint, Vortex Razor footprint and red dots with other...
Manuf.: CJ Manufactory
Expedition: Out of stock
Price from: 140 $
Original CJ Manufactury steel rail for CZ 457 models that works as a reduction from CZ 457 11mm dovetail for Blaser interface.
Manuf.: Lok
Expedition: Out of stock
Discount: 22,7 %Price from: 85 $
Alu grips for CZ 75B & SP-01 models, CZ Shadow 2 models and CZ TS 2 models. Excellent quality products from LOK Grips in USA.
Manuf.: Strike Industries
Expedition: Out of stock
Price: 26 $
The Strike Industries Selector Switch for CZ Scorpion EVO is both an ambidextrous and non-ambidextrous package (3-pieces) which allows the shooter to configure the setup needed while adding short but wide...
Manuf.: Evo Arms
Expedition: In stock
Price: 58 $
Original Evo Arms optic plate for CZ P-10 Optics Ready models. This plate allows mounting of a red dot sight with Trijicon RMR and Trijicon SRO footprint [full list below] to your CZ.
Manuf.: CZ
Expedition: In stock
Price: 10 $
Original CZ part.
Manuf.: CZ
Expedition: In stock
Price: 85 $
Original CZ magazine for CZ 557 models. Capacity of the magazine is 4 round. CZ steel magazine in caliber .308 WIN / .243 WIN.
Manuf.: CZ
Expedition: In stock
Price: 110 $
CZ grips in the original 1975 design when the legendary CZ 75 came first time out of production.
Manuf.: Eemann Tech
Expedition: In stock
Price: 45 $
Brass base pad for CZ TS 2 models, CZ 75 Tactical Sports, CZ TS Czechmate & CZ TSO. This mag pad will work together with magwell as well as without magwell.
Manuf.: Angry Bear
Expedition: In stock
Price: 50 $
Fixed sight set for optics ready models of CZ P-10C, CZ P-10S, CZ P-10F and CZ P-10SC.
Manuf.: Impact Machine
Expedition: In stock
Price: 109 $
IM optic plate with rear sight for CZ Shadow 2 Optics Ready and CZ Shadow 2 Compact. This plate allows mounting of a red dot sight with Holosun 407K, 507K & EPS Carry footprint to your CZ.
Manuf.: DPM
Expedition: In stock
Price: 100 $
DPM Springs for CZ 75 SP-01 Shadow models. This recoil system is a direct replacement for the factory recoil system. DPM springs significantly reduces recoil, allows faster follow up shots and protects slide...
Manuf.: Falco
Expedition: In stock
Price: 98 $
Leather holster from Slovakian company Falco for CZ 75 P-01 models, CZ 75 Compact models. The holster has two belt loops shaping the holster around your body. Classic and simple design with sturdy...
Manuf.: Toni System
Expedition: Out of stock
Price: 85 $
Brass frame mount & frame weight for CZ Shadow 2 models. Adds 185,9g weight to the frame and allows mounting of thumb rest on the side of it. Made in Italy by Toni System.
Manuf.: Falco
Expedition: In stock
Common price: 95 $Price: 75 $
Leather holster from Slovakian company Falco for CZ P-10F in .45 ACP. The holster has two belt loops shaping the holster around your body. Classic and simple design with sturdy construction and open top for...
Manuf.: Manul
Expedition: In stock
Price: 30 $
Nexum grips for CZ P-10S models. The unique Katana texture material provides an exceptionally firm but comfortable grip without damaging your clothing or equipment.
Manuf.: CZ
Expedition: In stock
Price: 115 $
Fully adjustable rear sight for CZ Kadet models: CZ P-07 Kadet, CZ P-09 Kadet, CZ 75 SP-01 Kadet & CZ Shadow 2 Kadet. This rear sight fits the factory front sight.
Manuf.: Ascalon Arms
Expedition: In stock
Price: 80 $
Compensator for CZ Bren 2 in 5.56x45 caliber. Made of 4140 steel. Thread 1/2x28 UNF.
Manuf.: Toni System
Expedition: In stock
Price from: 110 $
Original TS magwell for CZ TS 2 models, CZ 75 Tactical Sports, CZ TS Czechmate & CZ TSO. Hard elox finish, made of aluminium.
Manuf.: Eemann Tech
Expedition: In stock
Price from: 130 $
Short brass grips for CZ 75B & SP-01 models, CZ Shadow 2 models and CZ TS 2 models. These grips are short and thus to be used only together with magwell.
Manuf.: Neoteric Designs
Expedition: In stock
Price from: 90 $
Original ND extended safety levers for CZ Bren 2 models. Simple ergonomical solution.
Manuf.: Angry Bear
Expedition: In stock
Price: 60 $
Fixed sight set for CZ P-07 models and CZ P-09 models (not kadet). Sight set with grooved rear sight and fiber optic front sight. Made in US by Angry Bear Arms.
Manuf.: CZ
Expedition: In stock
Price from: 40 $
Original tactical CZ base pad for CZ P-10S models, CZ P-10C models, CZ P-10F models in 9x19 and CZ P-10SC models. Made of aluminium. CZ tactical base pad. This base pad will not work together with magwell.
Manuf.: DPM
Expedition: In stock
Price: 120 $
DPM Springs for CZ 97B, CZ 97BD models. This recoil system is a direct replacement for the factory recoil system. DPM springs significantly reduces recoil, allows faster follow up shots and protects slide...
Manuf.: LPA
Expedition: In stock
Price: 110 $
Adjustable sight set for CZ P-07 models and CZ P-09 models (not kadet). Sight set with height and side dotted rear sight and dotted front sight.
Manuf.: LPA
Expedition: In stock
Price: 110 $
Fully adjustable sight set for CZ 75B models, CZ 75 P-01 & Compact models, CZ 75 SP-01 models, CZ 85 and CZ 97 models. Sight set with fully adjustable rear sight and front sight. White outline design.
Manuf.: LPA
Expedition: In stock
Price: 110 $
Fully adjustable sight set for CZ Shadow 2 models, CZ 75 SP-01 Shadow models and other CZ Shadow line models. Sight set with side and height adjustable.
Manuf.: CZ
Expedition: In stock
Discount: 20,0 %Price: 40 $
Original CZ single / double point sling for CZ Bren 2 and CZ Scorpion Evo 3 S1 models in FDE.
Manuf.: CZ
Expedition: In stock
Price: 10 $
Original CZ part.
Manuf.: Falco
Expedition: In stock
Common price: 95 $Price: 75 $
Leather holster from Slovakian company Falco for CZ P-10C models in 9x19. The holster has two belt loops shaping the holster around your body. Classic and simple design with sturdy construction and open top...
Manuf.: Strike Industries
Expedition: Out of stock
Price: 40 $
Improved charging handle for CZ Scorpion EVO. Prevents fingers from snagging on the Picatinny rail located above the lever.
Manuf.: DPM
Expedition: In stock
Price: 100 $
DPM Springs for CZ P-10S models. This recoil system is a direct replacement for the factory recoil system. DPM springs significantly reduces recoil, allows faster follow up shots and protects slide and frame.
Manuf.: CZ
Expedition: In stock
Price: 30 $
Original CZ sling in orange color, made of combination of nylon and rubber. For CZ 457 models, CZ 600 models, CZ 527 models and CZ 557 models. Will fit also any other CZ long rifle. From the inside side the...
Manuf.: Toni System
Expedition: In stock
Price: 60 $
Aluminium frame mount & frame weight for CZ P-10C models. Adds 41g weight to the frame and allows mounting of thumb rest on the side of it. Made in Italy by Toni System.
Manuf.: Falco
Expedition: Out of stock
Common price: 95 $Price: 75 $
Leather holster from Slovakian company Falco for CZ 75 SP-01 Shadow models. The holster has two belt loops shaping the holster around your body. Classic and simple design with sturdy construction and open...
Manuf.: CZ
Expedition: Out of stock
Price: 30 $
Original CZ magazine for CZ Scorpion Evo models. Capacity of the magazine is 10 round. Transparent polymer CZ magazine.
Manuf.: LPA
Expedition: In stock
Price from: 140 $
Adjustable sight set for CZ Kadet models: CZ Shadow 2 kadet, CZ 75 SP-01 Kadet, CZ P-07 Kadet and CZ P-09 Kadet. Sight set with fully adjustable rear sight and fiber optic front sight. Made in Italy by LPA.
Manuf.: Lok
Expedition: Out of stock
Price from: 110 $
Alu grips for CZ 75B & SP-01 models, CZ Shadow 2 models and CZ TS 2 models. Excellent quality products from LOK Grips in USA.
Manuf.: CZ
Expedition: Out of stock
Price: 85 $
Original CZ magazine for CZ TS 2 models, CZ 75 Tactical Sports, CZ TS Czechmate & CZ TSO. Capacity of the magazine is 20 round. The magazine has polymer mag pads.
Manuf.: CZ
Expedition: In stock
Price: 40 $
Front sight for CZ Shadow 2 Orange and CZ Kadet models. This front sight fits the factory rear sights of these CZs.
Manuf.: Kummer
Expedition: In stock
Price: 90 $
Red dot mount for CZ P-10C models, CZ P-10S models, CZ P-10F models and CZ P-10SC models. Allows mounting of Trijicon RMR and Trijicon SRO red dots.
Manuf.: Neoteric Designs
Expedition: In stock
Price: 125 $
Original ND adjustable cheek riser for CZ Bren 2 BR folding stocks. Simple ergonomical solution. The item is extremely durable and simple & easy to manipulate with a system of spring loaded button.
![CZ P-01, CZ 75 Compact main spring plug [without lanyard loop] | part #22](https://www.cz-parts.com/deploy/img/products/4885/tn_CZ_P_01__CZ_75_Compact_main_spring_plug__without_lanyard_loop____part__22.jpg "CZ P-01, CZ 75 Compact main spring plug [without lanyard loop] | part #22")
