Manuf.: Toni System
Expedition: In stock
Price from: 110 $
Original TS magwell for CZ TS 2 models, CZ 75 Tactical Sports, CZ TS Czechmate & CZ TSO. Hard elox finish, made of aluminium.
Manuf.: Armanov
Expedition: Out of stock
Price from: 30 $
Armanov base pad for CZ TS 2 models, CZ 75 Tactical Sports, CZ TS Czechmate & CZ TSO. Hard elox finish, made of aluminium.
Manuf.: Toni System
Expedition: In stock
Price from: 140 $
Original TS Open magwell for CZ TS 2 models, CZ 75 Tactical Sports, CZ TS Czechmate & CZ TSO. Hard elox finish, made of aluminium.
Manuf.: Toni System
Expedition: Out of stock
Price: 130 $
Original TS magwell for CZ TS 2 models, CZ 75 Tactical Sports, CZ TS Czechmate & CZ TSO. Made of brass.
Manuf.: Lok
Expedition: In stock
Price: 290 $
Original CZ magwell for CZ TS 2 models, CZ 75 Tactical Sports, CZ TS Czechmate & CZ TSO. CZ magwell made of brass.
Manuf.: Eemann Tech
Expedition: In stock
Price: 134 $
Original ET magwell for CZ TS 2 models, CZ 75 Tactical Sports, CZ TS Czechmate & CZ TSO. Made of brass.
Manuf.: CZ
Expedition: In stock
Price: 150 $
Original CZ magwell for CZ TS 2 models, CZ 75 Tactical Sports, CZ TS Czechmate & CZ TSO. CZ magwell made of brass.
Manuf.: Lok
Expedition: Out of stock
Discount: 18,2 %Price from: 180 $
Set of alu grips and alu magwell for CZ TS 2 models, CZ 75 Tactical Sports, CZ TS Czechmate & CZ TSO. Excellent quality products from LOK Grips in USA.
Manuf.: CZ
Expedition: In stock
Price from: 110 $
Original CZ magwell for CZ TS 2 models, CZ 75 Tactical Sports, CZ TS Czechmate & CZ TSO. Hard elox finish, made of aluminium.
Manuf.: Eemann Tech
Expedition: Out of stock
Price: 97 $
Slide stop designed at the same time to function as a thumb rest. Designed to work with CZ TS 2 models.
Manuf.: Outer Impact
Expedition: In stock
Price: 80 $
Universal red dot mount for CZ TS 2 models. Allows mounting of various red dots - complete list as per below.
Manuf.: CZ
Expedition: Out of stock
Price: 85 $
Original CZ magazine for CZ TS 2 models, CZ 75 Tactical Sports, CZ TS Czechmate & CZ TSO. Capacity of the magazine is 20 round. The magazine has polymer mag pads.
Manuf.: CZ
Expedition: Out of stock
Price from: 45 $
Fiber optic front sight for CZ TS 2 Orange. This front sight fits the factory rear sights of this CZ.
Manuf.: Toni System
Expedition: In stock
Price from: 150 $
Universal red dot side mount for CZ TS 2 models and CZ TS 1 models with thumb rest : CZ TS 2 Orange, CZ TS 2 Racing Green, CZ TS 2 Deep Bronze, CZ TS Czechmate and CZ TS Orange. Allows installation of...
Manuf.: DPM
Expedition: In stock
Price: 130 $
DPM Springs for CZ TS 2 models. This recoil system is a direct replacement for the factory recoil system. DPM springs significantly reduces recoil, allows faster follow up shots and protects slide and frame.
Manuf.: DPM
Expedition: In stock
Price: 100 $
DPM Springs for CZ 75 Tactical Sports. This recoil system is a direct replacement for the factory recoil system. DPM springs significantly reduces recoil, allows faster follow up shots and protects slide and...
Manuf.: Eemann Tech
Expedition: In stock
Price: 102 $
Slide stop designed at the same time to function as a thumb rest. Designed to work with CZ Shadow 2, CZ Shadow 2 Compact & CZ TS 2.
Manuf.: Angry Bear
Expedition: In stock
Price: 30 $
Front sight filler for use when you do not to have a front sight installed. Whether you have Optics Ready CZ Shadow 2 and have instealled a red dot, or if you replaced your rear sight by red dot mount on...
Manuf.: Toni System
Expedition: In stock
Price from: 10 $
Weaker firing pin spring is being used together with weaker main spring (hammer spring) in order to avoid malfunctions. Made by gunsmith Zendl.
Manuf.: Eemann Tech
Expedition: Out of stock
Price: 30 $
Original slide stop pin for most CZ models. Original ET product. After the last round is fired from the magazine, the slide will not remain in the rear position.
Manuf.: CZ
Expedition: In stock
Price from: 110 $
Aluminium short grips for CZ Shadow 2 models, CZ TS 2 models and other CZ 75B & SP-01 models. These grips are short and thus to be used only with magwell. CZ grips with Shadow 2 design.
Manuf.: Eemann Tech
Expedition: In stock
Price: 40 $
Set of pins for CZ models for the most commonly disassembled and assembled pins. Compatible with CZ TS 2 models, CZ Shadow 2 models, CZ 75B models and CZ 75 SP-01 models incl SP01 Shadow.
Manuf.: CZ
Expedition: Out of stock
Price: 10 $
Original set of buffers for most CZ models. The set contains 3 thick buffers and 2 thin buffers. Original CZ product.
Manuf.: Zendl
Expedition: In stock
Price from: 15 $
Sear spring replacement for most of CZ models. Sear spring allows increase in trigger pull. Made in Czech republic by gunsmith Zendl.
Manuf.: Toni System
Expedition: Out of stock
Price from: 10 $
Recoil spring for most of CZ models. Will allow easier manipulation with slide and achieve better behaviour of the gun. By using weaker recoil spring you can reduce the lifetime of the gun. Made in Italy by...
Manuf.: Toni System
Expedition: In stock
Price from: 10 $
Weaker main spring (hammer spring) for most of CZ models. Will achieve lower trigger pull, especially in double action regime. To avoid malfunctions its reccomended to switch also firing pin spring for...
Manuf.: Eemann Tech
Expedition: In stock
Price: 15 $
Extreme extractor spring replacement for most of CZ models. Stronger spring to avoid malfunctions.
Manuf.: Eemann Tech
Expedition: Out of stock
Price: 20 $
Set of buffers for most CZ models.
Manuf.: Eemann Tech
Expedition: Out of stock
Price: 15 $
Competition sear spring replacement for most of CZ models. Competition sear spring allows decrease in trigger pull.
Manuf.: CZ
Expedition: In stock
Price: 150 $
Brass grips for CZ 75B & SP-01 models, CZ Shadow 2 models and CZ TS 2 models. These grips are long and thus to be used only without magwell.
Manuf.: CZ
Expedition: In stock
Price from: 110 $
Aluminium grips for CZ Shadow 2 models, CZ TS 2 models and other CZ 75B & SP-01 models. These grips are long and thus to be used only without magwell.
Manuf.: Armanov
Expedition: Out of stock
Price: 70 $
The pusher clamps onto the slide, eliminating the need for a hammer and vise when adjusting your fixed rear sight.
Manuf.: Zendl
Expedition: In stock
Price: 75 $
Precise bushing of the barrel for CZ Shadow 2, CZ TS 2, CZ 75 SP-01. This unique part reduces the scattering of the pistol. Designed for CZ pistols with barrel diameter 14mm and diameter of the bore for...
Manuf.: Eemann Tech
Expedition: Out of stock
Price: 97 $
Slide stop designed at the same time to function as a thumb rest. Designed to work with CZ Shadow 2, CZ P-01 & CZ 75 D Compact models.
Manuf.: CZ
Expedition: In stock
Price: 75 $
Original CZ base pad for CZ Shadow 2 models, CZ 75 SP-01 models. Made of brass. CZ base pad +2rnd. This base pad will not work together with magwell.
Manuf.: Toni System
Expedition: Out of stock
Price from: 65 $
Original Toni System base pad for CZ Shadow 2 models, CZ 75B models, CZ 75 SP-01 models, CZ 75 P-01 models and CZ 75 Compact models. Hard elox finish, made of aluminium.
Manuf.: Toni System
Expedition: Out of stock
Price from: 54 $
Original Toni System base pad for CZ Shadow 2 models, CZ 75B models, CZ 75 SP-01 models, CZ 75 P-01 models and CZ 75 Compact models. Hard elox finish, made of aluminium.
Manuf.: Toni System
Expedition: In stock
Price from: 43 $
Original Toni System base pad for CZ Shadow 2 models, CZ 75B models, CZ 75 SP-01 models, CZ 75 P-01 models and CZ 75 Compact models. Hard elox finish, made of aluminium.
Manuf.: Toni System
Expedition: In stock
Price from: 43 $
Original Toni System base pad for CZ Shadow 2 models, CZ 75B models, CZ 75 SP-01 models, CZ 75 P-01 models and CZ 75 Compact models. Hard elox finish, made of aluminium.
Manuf.: Toni System
Expedition: In stock
Price from: 35 $
Original Toni System base pad for CZ Shadow 2 models, CZ 75B models, CZ 75 SP-01 models, CZ 75 P-01 models and CZ 75 Compact models. Hard elox finish, made of aluminium.
Manuf.: Toni System
Expedition: In stock
Price from: 30 $
Original Toni System base pad for CZ Shadow 2 models, CZ 75B models, CZ 75 SP-01 models, CZ 75 P-01 models and CZ 75 Compact models. Hard elox finish, made of aluminium. Toni System base pad.
Manuf.: Toni System
Expedition: In stock
Price from: 35 $
Original CZ base pad for CZ Shadow 2 models, CZ 75B models, CZ 75 SP-01 models, CZ 75 P-01 models and CZ 75 Compact models. Hard elox finish, made of aluminium. CZ base pad +2rnd.
Manuf.: CZ
Expedition: In stock
Price from: 35 $
Original CZ base pad for CZ Shadow 2 models, CZ 75B models, CZ 75 SP-01 models, CZ 75 P-01 models and CZ 75 Compact models. Hard elox finish, made of aluminium.
Manuf.: CZ
Expedition: In stock
Price from: 35 $
Original CZ base pad for CZ Shadow 2 models, CZ 75 SP-01 models. Hard elox finish, made of aluminium. CZ base pad +2rnd. This base pad will not work together with magwell.
Manuf.: CZ
Expedition: In stock
Price from: 35 $
Original CZ base pad for CZ Shadow 2 models, CZ 75 SP-01 models. Hard elox finish, made of aluminium. CZ base pad +0rnd. This base pad will work together with magwell as well as without magwell.ll.
Manuf.: CZ
Expedition: In stock
Price from: 30 $
Original CZ base pad for 16rnd mags of CZ 75B models. Hard elox finish, made of aluminium. CZ base pad +0rnd. This base pad will not work together with magwell.
Manuf.: Boss Components
Expedition: In stock
Price from: 35 $
Base pad for CZ Shadow 2 models, CZ 75 SP-01 models. Hard elox finish, made of aluminium. This base pad will work together with magwell as well as without magwell.ll.
Manuf.: CZ
Expedition: In stock
Price: 10 $
Original CZ part.
Manuf.: CZ
Expedition: In stock
Price: 10 $
Original CZ part.
Manuf.: CZ
Expedition: In stock
Price: 10 $
Original CZ part.
![CZ Shadow 2, CZ 75B, CZ P-01, CZ 75 SP-01 alu TS base pad | +1.5rnd [for IPSC Box]](https://www.cz-parts.com/deploy/img/products/3191/tn_CZ_SHADOW_2__CZ_75B___SP_01__CZ_75_P_01___COMPACT_ALU_MAG_PAD__1_5rnd__for_IPSC_Box__.jpg "CZ Shadow 2, CZ 75B, CZ P-01, CZ 75 SP-01 alu TS base pad | +1.5rnd [for IPSC Box]")
