By model CZ Shadow 2 (171 )
Product was added to cart

CZ Shadow 2 - Page 4

Accessories for CZ Shadow 2 models: both standard versions of CZ Shadow 2 as well as CZ Shadow 2 Optics Ready.
You can find here excellent quality sights, grips, magazines, magwells and mag pads, also red dot plates for Optics Ready model, red dot mounts as a replacement of rear sight for standard variants, springs for reduction of recoil, holsters, many other unique parts.
Unique accessories✔️ In stock✔️ Original CZ products✔️

Sort by: 
Showing 151 - 171 from the total of 171
| 1 2 4
CZ Shadow 2, CZ TS 2, CZ 75 SP-01 rear sight pusher

CZ Shadow 2, CZ TS 2, CZ 75 SP-01 rear sight pusher

Manuf.: Armanov

Expedition: In stock

Price: 105 $

The pusher clamps onto the slide, eliminating the need for a hammer and vise when adjusting your fixed rear sight.
CZ Shadow 2, CZ TS 2, CZ 75B & SP-01 alu CZ grips

CZ Shadow 2, CZ TS 2, CZ 75B & SP-01 alu CZ grips

Manuf.: CZ

Expedition: In stock

Price from: 164 $

Aluminium grips for CZ Shadow 2 models, CZ TS 2 models and other CZ 75B & SP-01 models. These grips are long and thus to be used only without magwell.
CZ Shadow 2, CZ TS 2, CZ 75B & SP-01 brass CZ grips

CZ Shadow 2, CZ TS 2, CZ 75B & SP-01 brass CZ grips

Manuf.: CZ

Expedition: Out of stock

Price: 224 $

Brass grips for CZ 75B & SP-01 models, CZ Shadow 2 models and CZ TS 2 models. These grips are long and thus to be used only without magwell.
CZ Shadow 2, CZ TS 2, CZ 75B & SP-01 competition sear spring | -10% power

CZ Shadow 2, CZ TS 2, CZ 75B & SP-01 competition sear spring | -10% power

Manuf.: Eemann Tech

Expedition: In stock

Price: 23 $

Competition sear spring replacement for most of CZ models. Competition sear spring allows decrease in trigger pull.
CZ Shadow 2, CZ TS 2, CZ 75B & SP-01 extreme extractor spring | +10% power

CZ Shadow 2, CZ TS 2, CZ 75B & SP-01 extreme extractor spring | +10% power

Manuf.: Eemann Tech

Expedition: In stock

Price: 23 $

Extreme extractor spring replacement for most of CZ models. Stronger spring to avoid malfunctions.
CZ Shadow 2, CZ TS 2, CZ 75B & SP-01 main spring

CZ Shadow 2, CZ TS 2, CZ 75B & SP-01 main spring

Manuf.: Toni System

Expedition: In stock

Price from: 15 $

Weaker main spring (hammer spring) for most of CZ models. Will achieve lower trigger pull, especially in double action regime. To avoid malfunctions its reccomended to switch also firing pin spring for...
CZ Shadow 2, CZ TS 2, CZ 75B & SP-01 recoil spring

CZ Shadow 2, CZ TS 2, CZ 75B & SP-01 recoil spring

Manuf.: Toni System

Expedition: In stock

Price from: 15 $

Recoil spring for most of CZ models. Will allow easier manipulation with slide and achieve better behaviour of the gun. By using weaker recoil spring you can reduce the lifetime of the gun. Made in Italy by...
CZ Shadow 2, CZ TS 2, CZ 75B & SP-01 sear spring

CZ Shadow 2, CZ TS 2, CZ 75B & SP-01 sear spring

Manuf.: Zendl

Expedition: In stock

Price from: 23 $

Sear spring replacement for most of CZ models. Sear spring allows increase in trigger pull. Made in Czech republic by gunsmith Zendl.
CZ Shadow 2, CZ TS 2, CZ 75B & SP-01 Shadow hammer strut pin

CZ Shadow 2, CZ TS 2, CZ 75B & SP-01 Shadow hammer strut pin

Manuf.: Eemann Tech

Expedition: In stock

Price: 11 $

Hammer strut pin for CZ 75 / 85 / 97, CZ 75 SP-01 Shadow, CZ 75 Tactical Sports and CZ Shadow 2.
CZ Shadow 2, CZ TS 2, CZ 75B & SP-01 Shadow set of pins

CZ Shadow 2, CZ TS 2, CZ 75B & SP-01 Shadow set of pins

Manuf.: Eemann Tech

Expedition: Out of stock

Price: 60 $

Set of pins for CZ models for the most commonly disassembled and assembled pins. Compatible with CZ TS 2 models, CZ Shadow 2 models, CZ 75B models and CZ 75 SP-01 models incl SP01 Shadow.
CZ Shadow 2, CZ TS 2, CZ 75B & SP-01 short alu CZ grips

CZ Shadow 2, CZ TS 2, CZ 75B & SP-01 short alu CZ grips

Manuf.: CZ

Expedition: In stock

Price from: 164 $

Aluminium short grips for CZ Shadow 2 models, CZ TS 2 models and other CZ 75B & SP-01 models. These grips are short and thus to be used only with magwell. CZ grips with Shadow 2 design.
CZ Shadow 2, CZ TS 2, CZ 75B & SP-01 weaker firing pin spring

CZ Shadow 2, CZ TS 2, CZ 75B & SP-01 weaker firing pin spring

Manuf.: Toni System

Expedition: In stock

Price from: 15 $

Weaker firing pin spring is being used together with weaker main spring (hammer spring) in order to avoid malfunctions. Made by gunsmith Zendl.
CZ Shadow 2, CZ TS 2, CZ 75B, SP-01, P-01 & Compact front sight filler

CZ Shadow 2, CZ TS 2, CZ 75B, SP-01, P-01 & Compact front sight filler

Manuf.: Angry Bear

Expedition: In stock

Price: 45 $

Front sight filler for use when you do not to have a front sight installed. Whether you have Optics Ready CZ Shadow 2 and have instealled a red dot, or if you replaced your rear sight by red dot mount on...
CZ Shadow 2, CZ TS 2, CZ TS slide stop with thumb rest

CZ Shadow 2, CZ TS 2, CZ TS slide stop with thumb rest

Manuf.: Eemann Tech

Expedition: Out of stock

Price: 152 $

Slide stop designed at the same time to function as a thumb rest. Designed to work with CZ Shadow 2, CZ Shadow 2 Compact & CZ TS 2.
CZ TS 2, CZ Shadow 2 adjustable mag release button

CZ TS 2, CZ Shadow 2 adjustable mag release button

Manuf.: CZ

Expedition: In stock

Price from: 52 $

Original CZ adjustable magazine release button with 3 positions. Allows you to situation mag release button to better fit your hand.
CZ TS 2, CZ Shadow 2, CZ 75B & SP-01 alu CZ grips

CZ TS 2, CZ Shadow 2, CZ 75B & SP-01 alu CZ grips

Manuf.: CZ

Expedition: In stock

Price from: 164 $

Aluminium grips for CZ TS 2 models, CZ Shadow 2 and other CZ 75B & SP-01 models. Original CZ grips with TS 2 design. These grips are long and thus to be used only without magwell.
CZ TS 2, CZ Shadow 2, CZ 75B & SP-01 short alu CZ grips

CZ TS 2, CZ Shadow 2, CZ 75B & SP-01 short alu CZ grips

Manuf.: CZ

Expedition: In stock

Price from: 164 $

Aluminium short grips for CZ TS 2 models, CZ Shadow 2 models and other CZ 75B & SP-01 models. These grips are short and thus to be used only with magwell. CZ grips with TS 2 design.
Doublebrush CZ bore cleaning | 9x19

Doublebrush CZ bore cleaning | 9x19

Manuf.: CZ

Expedition: In stock

Price: 30 $

Original CZ doublebrush bore cleaning string for fast and easy cleaning of your CZ. For caliber 9x19.
Recoil spring tester

Recoil spring tester

Manuf.: Armanov

Expedition: In stock

Price: 89 $

Recoil spring tester with simplistic design. Easy to use, makes testing the strength of your recoil springs quick and effective.
Thumb rest | 25°

Thumb rest | 25°

Manuf.: Toni System

Expedition: In stock

Price from: 82 $

Thumb rest with 4 holes mounting for right hand shooters. For installation of the thumb rest to the pistol its either necessary to drill holes into the frame, or you can use the frame weight from Toni System...
Thumb rest | 47°

Thumb rest | 47°

Manuf.: Toni System

Expedition: Out of stock

Price from: 75 $

Thumb rest with 3 holes mounting for right hand shooters. For installation of the thumb rest to the pistol its either necessary to drill holes into the frame, or you can use the frame weight from Toni System...
 
| 1 2 4

Tune your competition special exactly to your liking

The CZ Shadow 2, as the successor to the famous CZ SP-01 Shadow, became famous in the field of sport shooting. Although it is developed directly for sport shooting, and therefore is a perfect sport pistol already in its factory configuration, shooters very often complement it with various accessories and replace factory parts with various tuned ones.
 
The reason is simple: fractions of a second matter in competitions, and every shooter tries to tailor their firearm exactly to themselves.

What you can find in this category

In this category, we have divided original CZ as well as aftermarket accessories from renowned brands such as Toni System, Zendl, Angry Bear or Armanov into clear categories. In each, you will find accessories that will definitely fit your CZ Shadow 2.
 
ATTENTION: This category contains accessories for both the standard CZ Shadow 2 and the OR (Optics Ready) variant. Keep this in mind especially if you are looking for a way to mount a red dot to your CZ Shadow 2.

Optics and sights

Even though red dots are basically a standard in certain disciplines, they are banned in others. Some shooters also prefer classic iron sights. You can use the same sights on standard and optics ready CZ Shadow 2 models. These are mostly sport-tuned, meaning fully adjustable.
 
ATTENTION: If you are purchasing a sight set or a front sight for the CZ Shadow 2 Orange model, please write it in the comment. The front sight mounting mechanism of this model differs slightly.
 
If you decide to shoot with a red dot, you need different accessories for its installation depending on whether it is an optics ready or a classic model:
  • optics ready models: you need an optic plate. Focus on choosing the right footprint for your red dot (they differ in mounting surface size, screw spacing, and pins)
  • classic models: you need a red dot mount. Thanks to this base, which you install instead of the rear sight, you can mount the red dot comfortably. Again, make sure to choose the right footprint for your red dot.
Fortunately, many manufacturers share the same footprints, so orientation is not difficult at all. You can verify compatibility in the description of each item.

Ergonomics and recoil

The CZ Shadow 2 is no lightweight, but a robust all-metal pistol. Therefore, you will appreciate anything that helps you hold it firmly and comfortably in your hands during training and competitions.
 
From the factory, the CZ Shadow 2 is equipped with aluminum grips. They are lightweight, and if the material suits you, you can choose a different color version or texture from our selection. In case you would prefer to add weight to the lower part of the firearm to eliminate recoil, choose brass grips instead. You can also select from various profiles depending on whether you have smaller or larger palms.
 
On our e-shop, you will find grips divided into long and short grips. Whether to get one or the other depends entirely on whether you have a magwell installed on your firearm. Its funnel-shaped entry significantly speeds up reloading and also adds extra grams to the bottom of the firearm, which again helps to tame recoil.
  • In case you have a magwell, you need short grips. Long grips would not fit on a grip with a magwell.
  • If you do not use a magwell, choose from our wide selection of long grips.
TIP: You can easily install grips on your CZ Shadow 2 with the guide on our CZ Parts YouTube channel.
 
Another valuable partner for managing recoil is definitely a thumb rest. It is usually mounted on the left side (for right-handed shooters). The resting left thumb creates leverage that pushes the barrel downward upon firing, so it does not deflect as much from the line of sight.

Magazines and reloading

The magazine is basically a consumable item for competition shooters. During the competition itself, you need to have several of them on your belt, and after emptying them, you often mercilessly drop them straight onto the ground, which can damage them. Therefore, it is worth having more of them in stock.
 
The standard magazine base pad is thin and light. By installing a heavier (for example, brass) base pad, you increase the weight, and the magazine will slip out on its own more easily due to gravity. It also better protects the magazine body from deformation. Take a look also at base pads with extended capacity.

Internal mechanism

The internal mechanism of the firearm must function with absolute reliability. During cleaning or disassembly, it can happen that some small pin or part occasionally rolls away. For these cases, take a look at the spare parts category, where you will find all parts marked with a number that corresponds to its number in the exploded view in the firearm manual.
 
However, there is also a great potential for tuning inside the firearm. Springs are among the parts that shooters frequently replace. Focus primarily on:
  • recoil spring, which affects the cycling of the slide,
  • main spring, which drives the hammer against the firing pin
  • and also trigger spring, which determines the trigger pull weight.
For sport shooting, these springs are often replaced with lighter ones. However, it also depends on the ammunition you use, and lighter does not always mean better. You can read more about the topic of springs, including what each of them affects and how to combine them appropriately, in the Springs category.

Carrying and special accessories

To carry your firearm comfortably and keep it safely stored, choose from our selection of holsters. You will mostly find kydex holsters, precisely molded to the shape of the firearm, into which you can securely click the pistol and it won't move at all. The holsters do not deform, so you do not have to worry about struggling with a stretched opening over time.
 
Whether you choose a holster for outside-the-waistband (OWB) or inside-the-waistband (IWB) carry depends entirely on your preferences. Take into account the large dimensions and weight of the CZ Shadow 2.
 
Do not forget to also take a look at the unique parts category, where you will find other clever accessories from renowned manufacturers like Toni System, Eemann Tech and others, for the perfect customization of the firearm to your needs.
 
CZ Parts | Accessories for your CZ Sunlight systems - tvorba e-shopů